I just completed 1-1/2 hours of Dec system modifications to my 12"
LX-200 to enable the additional weight of experimental equipment
planned for my Losmandy plate system. I did not have any previous
problems with my Dec drive, including excessive backlash or retrograde
motion going on 4 years use.

The side benefits are quite encouraging for others to minimize Dec
backlash, retrograde motion and quite possibly increase Dec drive
life beyond RA drive life. However, I still need to test my scope
thoroughly to see if there is a downside to these modifications.
I would also want to investigate their use on 8" and 10" scopes.

I am concerned that others may damage their scopes and/or need to
send them back to Meade if explicit instructions are not followed. I
would classify this as an advanced project that could be done by many
if very specific details are furnished, including pictures and parts.

What I need to know is anyone interested in a MAPUG posting of
explicit details describing Dec system modifications pointing to a
web site for further details and pictures? If enough interest exists, I
will seriously consider pursuing the matter.



--
Michael Hart
Husen Observatory

View index by [date] [author] [subject]
Previous message: Re: [M]: field derotater and flat fields, Glenn W. Elliott
Next message: Re: [M]: Differences between binocular manufacturers?, Ric L Ecker
Next message in thread: Re: [M]: Dec Drive System Modifications, Improving Performance, Bill Arnett