Some further clarification here... what is slipping is the knob not either
of the gears.

Felix

-----Original Message-----
Date: Friday, October 30, 1998 11:29 PM
Subject: Re: [M]: LX50 Dec Question


>Felix
>
>I too had that problem after switching to aluminum dec gears. I thought
>it was in the clutch, but no matter what clutch tension I tried the gear
>slipped. I am talking about the big 108 gear. It's slipping.
>After lots of trial and error, I determined the problem and now have
>excellent manual and electronic control over my dec. I simple replaced
>the mounting allyn screw with a different head (straight or phillips)
>and tightened it down very very tight. Works perfect now. You will need
>to adjust your clutch for the right feel.
>
>My opinion, is every adjustment bolt on the LX SCT's should be replaced
>with phillips head. I have a couple of allyn heads somewhat stripped.
>
>Remember, your warranty may not be valid if you tinker around with your
>scope.
>
>Take care Felix. Congrats.
>Gregory david Stempel
>

View index by [date] [author] [subject]
Previous message: [M]: Re: Re: Your Observatory, John Fraser
Next message: Re: [M]: Re: Your Observatory, John Fraser
Next message in thread: Re: [M]: LX50 Dec Question, Gregory David Stempel
Previous message in thread: Re: [M]: LX50 Dec Question, Gregory David Stempel