| |
[index]
[month]
[prev]
[next]
[thead-prev]
[thread-next]
Subject: Re: [M]: 416xt SCSI problem
From: Ralph P. Pass III
Reply To: mapug@shore.net
Date: Mon Nov 30 18:02:31 1998
|
While you're here, how about checking out the
Astronomy Book
List ? |
Could you provide the operating system, version of Pictorview, SCSI card, and
date of SCSI driver?
Thanks,
Ralph Pass
Jim Coatney wrote:
> I have been using a 416XT via a serial cable for a little while with few
> problems. I just tried hooking up via SCSI, and after trying some
> different combinations of IRQ, etc thought I had it going. However,
> when I try to take an image, the computer monitor shows the exposure
> taking place with the normal countdown to zero and when the image
> appears, it is totally white. The LCD display on the control box shows
> "0 exposure?" after which it displays " ***ABORT***", "SCSI Connected"
> There also is no sound from the camera from the shutter
> opening/closing. Any ideas?
>
> Jim Coatney
> Allen, TX
View index by [date] [author] [subject]
Previous message: Re: [M]: Pointing /Polar Alignment Problem, Ric L Ecker
Next message: Re: [M]: two questions, gazer
Next message in thread: Re: [M]: 416xt SCSI problem, Jim Coatney
Previous message in thread: [M]: 416xt SCSI problem, Jim Coatney
|
|