>> Jim Coatney wrote:
>>
>> > I have been using a 416XT via a serial cable for a little while with
few
>> > problems. I just tried hooking up via SCSI, and after trying some
>> > different combinations of IRQ, etc thought I had it going. However,
>> > when I try to take an image, the computer monitor shows the exposure
>> > taking place with the normal countdown to zero and when the image
>> > appears, it is totally white. The LCD display on the control box shows
>> > "0 exposure?" after which it displays " ***ABORT***", "SCSI Connected"
>> > There also is no sound from the camera from the shutter

SNIP>>
running Win95 on a Toshiba 740CDT notebbok (p166MMX, 32MB). using
Pictorview Version 6.4 release 1. Using an Eiger Labs >EigerMedia PCMCIA
SCSI Card, with the driver dated 4/22/97.


----------------------------
Jim,

For the record, My 416XT also on SCSI, has done this in the past too.
Sometimes I get an all black image if I try to combine several images. I
have gotten all white ones too. Most of the time my box shows 'CONNECTED
SCSI' but I have seen the abort message your report. There does not seem
to be any change I can report regarding the message and shutter operation.

I have my SCSI set on "4" and none of the other IRQ settings seemed to
matter in my setup while I was in SCSI.

Everything seems to be working on my 416 XT now except the autofocus is a
little crazy yet. I am getting some additional help with this issue however
and hope to have it corrected soon.

I am sorry that I don't know enough to help you directly but I thought I
would add these comments for Ralph and others to see. Maybe some comment in
this report will be helpful to someone out there who knows what the "fix" is
for your system.

ED REGISTRATO

View index by [date] [author] [subject]
Previous message: Re: [M]: Lunar GOTO beta 1.0 debugs Rob's brain, Robert Preston
Next message: [M]: Scope care, Michael Robbins
Previous message in thread: Re: [M]: 416xt SCSI problem, Jim Coatney