Thank you all for shedding light on this subject. I just expect something
happen when you push a button...I guess I'm ninety-fied
BG

Rick & Melissa Keil wrote:

> Bob Guilbert wrote:
> >
> > I thought about that but then it should move at least 1x to E.
> > If what you suggest is Meade's solution it deserves the big cheese award.
> > I'm discovering they could have made a few better design choices given the
> > cheap cost of electronics these days. Can anyone pls verify theirs does not
> > move by peeking under the bottom cover plate at 2x-East?
> > Thanks,
> > BG
>
> As Phil stated, this is exactly how it should operate. That rate works
> very well too, when guiding. Of coarse I don't have a 1X rate to compare
> it to, but I've never noticed or had any problems with the 2X speeds
> East or West.
>
> PS- I did verify it with my LX50.
>
> Rick Keil
> http://www.geocities.com/CapeCanaveral/Launchpad/4278/

View index by [date] [author] [subject]
Previous message: Re: [M]: Re: cable release for LX200/SLR control, RICHARD WINTER
Next message: [M]: Observing With LX10, Jack Estes
Next message in thread: Re: [M]: No E movement at 2X speed on LX50, Bill Arnett
Previous message in thread: Re: [M]: No E movement at 2X speed on LX50, Rick & Melissa Keil