Just to thow a loop in all of this, if you really want the E button to do
something, then activate E/W reversal feature.

:))))))

m.


Bob Guilbert wrote:

> Thank you all for shedding light on this subject. I just expect something
> happen when you push a button...I guess I'm ninety-fied
> BG
>
> Rick & Melissa Keil wrote:
>
> > Bob Guilbert wrote:
> > >
> > > I thought about that but then it should move at least 1x to E.
> > > If what you suggest is Meade's solution it deserves the big cheese award.
> > > I'm discovering they could have made a few better design choices given the
> > > cheap cost of electronics these days. Can anyone pls verify theirs does not
> > > move by peeking under the bottom cover plate at 2x-East?
> > > Thanks,
> > > BG
> >
> > As Phil stated, this is exactly how it should operate. That rate works
> > very well too, when guiding. Of coarse I don't have a 1X rate to compare
> > it to, but I've never noticed or had any problems with the 2X speeds
> > East or West.
> >
> > PS- I did verify it with my LX50.
> >
> > Rick Keil
> > http://www.geocities.com/CapeCanaveral/Launchpad/4278/



--

Astro Pics and Stuff: http://members.iconn.net/mgartlan/index.htm

View index by [date] [author] [subject]
Previous message: Re: [M]: LX200: Not broken anymore!, M. Gartland
Next message: [M]: CCD Guiding in ALT-AZ, Email address hidden
Previous message in thread: Re: [M]: No E movement at 2X speed on LX50, Bill Arnett