| |
[index]
[month]
[prev]
[next]
[thead-prev]
[thread-next]
Subject: Re: [M]: 416xt SCSI settings
From: Ralph P. Pass III
Reply To: mapug@shore.net
Date: Wed Apr 21 08:08:09 1999
|
While you're here, how about checking out the
Astronomy Book
List ? |
If you have two SCSI adapters, then perhaps the Pictor is on adapter 1. You make
this change in the ini file.
Ralph Pass
> I have just upgraded to a 400MHZ desktop with Win98 but have been unable to
> get my 416xt up and running again. I am, and was previously, using an Adaptec
> AHA2940AU PCI and everything worked fine. Now on bootup the SCSI card
> recognizes the 416 but when I start the Pictor software and try to connect
> the camera nothing happens.
> The SCSI card is IRQ=10, Pictor is IRQ=4 (LUN 4), the camera settings in the
> Pictor preferences are set at IRQ4 and SCSI ID 4.
> What do I have wrong? Can anyone send me the correct SCSI settings to use at
> bootup to reconfigure the SCSI card?
> Thanks in advance
> Max
View index by [date] [author] [subject]
Previous message: [M]: Meade 3.3 Focal Reducer, G.Miller
Next message: Re: [M]: 416xt SCSI settings, Ralph P. Pass III
Next message in thread: Re: [M]: 416xt SCSI settings, Ralph P. Pass III
Previous message in thread: [M]: RE: 416xt SCSI settings, Heapy Chris CG
|
|