| |
[index]
[month]
[prev]
[next]
[thead-prev]
[thread-next]
Subject: [M]: Re: How do I use a 2" eyepiece with a 1.25" eyepiece holder
From: Lowell F. Goodwin
Reply To: mapug@shore.net
Date: Mon May 03 19:36:14 1999
|
While you're here, how about checking out the
Astronomy Book
List ? |
You will have to get a 2" visual back. Meade makes one.
The 26mm that comes with the telescope is actually a very nice eyepiece. I
use it quite a bit for my workhorse EP.
I have several EP made by Celestron. Their are Ultimas and I had nothing
but very nice results. They are 42mm to 7.5mm.
I hope this assists you.
----- Original Message -----
Sent: Monday, May 03, 1999 9:53 PM
Subject: [M]: How do I use a 2" eyepiece with a 1.25" eyepiece holder
> I just bought a LX200 10" f/10 and I have a couple of questions as an
> astronomy neophyte.
-----
Clear skies
Lowell F. Goodwin
New Port Richey, FL
Museum Astronomical Resource Society (MARS Astronomy Club), Tampa, FL
Visit our web side: http://members.aol.com/MARSAstro
Aardvark Astornomy Center: http://members.tripod.com/~lowellfg/index.html
ICQ: 21305778
> thanks
View index by [date] [author] [subject]
Previous message: Re: [M]: How do I use a 2" eyepiece with a 1.25" eyepiece holder, Tom Wideman
Next message: Re: [M]: LX200 Dec Stops Responding, Tim McMahon
Next message in thread: Re: [M]: How do I use a 2" eyepiece with a 1.25" eyepiece holder, wyn palmer
Previous message in thread: Re: [M]: How do I use a 2" eyepiece with a 1.25" eyepiece holder, Tom Wideman
|
|