| |
[index]
[month]
[prev]
[next]
[thead-prev]
[thread-next]
Subject: Re: [M]: SCSI Problem w/ 416xt
From: Norman Schmidt
Reply To: mapug@shore.net
Date: Tue May 04 12:57:34 1999
|
While you're here, how about checking out the
Astronomy Book
List ? |
> Jesh schrieb:
>
> but the SCSI just hangs after clicking Connect , and then errors out.
> I
> have the SCSI ID on the box set to 7 (was at 4 default, changed it
> back to
> 4, no work) and set to 7 on the software. I tried 4 and 7 (7 should
> be it
> since that is the SCSI id I have set?).
7 is usually (and the case with the Adaptec 1460) the ID of the host
adaptor, so you cannot use it for another device. Did it work with 4 in
the beginnigg, or did you change to 7 before trying?
Try not to use 7 on the Meade box!
Bye, hope this helps, Norman
--
--
Norman Schmidt Universität Erlangen-Nürnberg
cand.chem.
View index by [date] [author] [subject]
Previous message: [M]: RE: SCSI Problem w/ 416xt, Karen Kerr
Next message: Re: [M]: 616 filter wheel, Dave Garland
Next message in thread: Re: [M]: SCSI Problem w/ 416xt, Ralph P. Pass III
Previous message in thread: [M]: RE: SCSI Problem w/ 416xt, Karen Kerr
|
|