I've not tried it under WIN98 but I do use a 1460B PCMCIA under WIN95.
The Controller Box should say 'CONNECTED SCSI' when the connection is
established successfully (IIRC). I do know that using the drivers
originally supplied with the 1460B I could not get a connection, I had
to go to the Adaptec site and download the latest drivers that are
listed there - I suggest you do the same. I don't load the 16-bit
drivers (the real-mode drivers).

Chris Heapy

>
> Is anyone out there successfully using Pictor View XT with 32bit drivers?
> I have an Adaptec 1460 PCMCIA card on my laptop. The 416 shows CONNECT SCSI
> when I turn it on but the Pictor View software will not talk to the camera.
> Win98 even recognizes the 416 and asks for the drivers for it when I boot up
> windows. Since I don't have any, other than the Pictor view software, Win98
> adds an unknown device named Meade 416 Pictor. I have the 32 bit drivers
> installed. I tried to load the 16bit drivers in Win95 (and on a Win98) laptop
> with no luck. I don't think I should even have to use drivers made for an OS
> that is about 7 years old but that's another story.
>
> TIA.
>
> Al

--
*Model Engineer Support Page*
Engineering: http://easyweb.easynet.co.uk/~chrish/homepage.htm
Astro Stuff: http://easyweb.easynet.co.uk/~chrish/lx200.htm

View index by [date] [author] [subject]
Previous message: Re: [M]: Auto Focus on 416xt - does it work?, Chris Heapy
Next message: Re: [M]: 416 & Pictor View XT with Win95/98 SCSI Drivers, Bert Mettier
Next message in thread: Re: [M]: 416 & Pictor View XT with Win95/98 SCSI Drivers, Bert Mettier
Previous message in thread: [M]: 416 & Pictor View XT with Win95/98 SCSI Drivers, Email address hidden