>
> Is anyone out there successfully using Pictor View XT with 32bit drivers?
> I have an Adaptec 1460 PCMCIA card on my laptop. The 416 shows CONNECT SCSI
> when I turn it on but the Pictor View software will not talk to the camera.
> Win98 even recognizes the 416 and asks for the drivers for it when I boot up
> windows. Since I don't have any, other than the Pictor view software, Win98
> adds an unknown device named Meade 416 Pictor. I have the 32 bit drivers
> installed. I tried to load the 16bit drivers in Win95 (and on a Win98) laptop
> with no luck. I don't think I should even have to use drivers made for an OS
> that is about 7 years old but that's another story.
>
> TIA.
>
> Al

Al,

I am using a Adaptec 1480 PCMCIA card and it works perfectly well. The
device manager shows a device called Meade 416 Pictor and the Pictor box
shows SCSI connected, just like yours. Make shure, that in the
Pictor.ini file SCSI_ADAPTER_NUMBER=1 is inserted: After the normal
installation, normally 0 is set and that has to be changed. You find it
under (SCSI Settings). If that does not work, I'm confident that
somebody on this group will be able to help you. There are some very
knowledgeable people on MAPUG.

Good Luck

Bert

View index by [date] [author] [subject]
Previous message: Re: [M]: 416 & Pictor View XT with Win95/98 SCSI Drivers, Chris Heapy
Next message: [M]: LXD650 woes, Stephen M. Linscott
Next message in thread: Re: [M]: 416 & Pictor View XT with Win95/98 SCSI Drivers, Email address hidden
Previous message in thread: Re: [M]: 416 & Pictor View XT with Win95/98 SCSI Drivers, Chris Heapy