| |
[index]
[month]
[prev]
[next]
[thead-prev]
[thread-next]
Subject: Re: [M]: Simultaneous LX200 Telescope and 416XT Control
From: Michael McNeil
Reply To: mapug@shore.net
Date: Wed Dec 01 19:20:54 1999
|
While you're here, how about checking out the
Astronomy Book
List ? |
--------------BE9F5BE6BACF881ADED4B595
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Mike, I'm not sure, but I run the scope on Comm port #1 and the 416 on
port2.
I use , "THE SKY" and I have never had a crash, except, when you connect
to the camera, usually first, and when it says wait for cool down, you
can't go into the Sky for a few seconds, 30 or so, but this is not a
problem with Max DL? Why, I don't know? But are you using SCSI for the
camera? Now I should say that I'm all Meade, except for the scope which
is a Compustar for now, but RS232 is
RS 232! Mike
http://www.caltel.com/~cno/
--------------BE9F5BE6BACF881ADED4B595
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Mike, I'm not sure, but I run the scope on Comm port #1 and the 416 on
port2.
<br>I use , "THE SKY" and I have never had a crash, except, when you connect
to the camera, usually first, and when it says wait for cool down, you
can't go into the Sky for a few seconds, 30 or so, but this is not a problem
with Max DL? Why, I don't know? But are you using SCSI for the camera?
Now I should say that I'm all Meade, except for the scope which is a Compustar
for now, but RS232 is
<br>RS 232! Mike
<br><u><A HREF="http://www.caltel.com/~cno/">http://www.caltel.com/~cno/</A></u></html>
--------------BE9F5BE6BACF881ADED4B595--
View index by [date] [author] [subject]
Previous message: [M]: Thumb Screws for Collimation (again), Tom Wideman
Next message: Re: [M]: Equipment for Beginning Astrophotography, Chris Vedeler
Next message in thread: Re: [M]: Simultaneous LX200 Telescope and 416XT Control, Michael J. Cook
Previous message in thread: [M]: Simultaneous LX200 Telescope and 416XT Control, Zook, Mike
|
|