With my ham radio programs talking between radios and the computer, I
have found that sometimes changing the program's default baud rate can
help--usually better for me to go with a lower number.

Mark Lancaster wrote:
>
> Have you tried uninstalling and reinstalling Skymap?
>
> > Joe Grida wrote:
> >
> > > Greetings from down-under!
> > >
> > > I have a 12" LX200 scope, which I operate with a Pentium PC and Skymap
> > > Pro v5. Up until last week, everything has worked flawlessly.
> > >
> > > Now, whenever I try to open a connection from the program to the
> > > telescope, Skymap returns an error, saying it cannot establish a
> > > connection.
> > >
> > > I have replaced the computer and the cable (one at a time), and still
> > > get the same error. So it seems likely that the telescope is the
> > > culprit. As far as I can tell, every other function on the scope works
> > > OK.
> > >
> > > Anybody got any suggestions?
> > >
> > > Joe Grida
> > > Bedford Stargate Obs.
> > > Mylor S.A. Australia

View index by [date] [author] [subject]
Previous message: Re: [M]: RS232 doesn't respond, Mark Lancaster
Next message: RE: [M]: RS232 doesn't respond, Ed Fitzgerald
Next message in thread: RE: [M]: RS232 doesn't respond, Ed Fitzgerald
Previous message in thread: Re: [M]: RS232 doesn't respond, Mark Lancaster