This is not an answer, only my experience with my 12"lx200.

I could not get skymap pro ver 4.0 to talk thru the rs232 interface with
a single short length cable. While I was messing around, I added an
additional longer cable (phone cord) and hooked the two together with a
y-jack phone splitter. Now it works......

It seems that the two will not talk unless I have the phone splitter
installed. (This splitter plugs into a standard phone jack and provide
two outlets).

All I can think is that the splitter is somehow conditioning/slowing the
signals.

Any ideas?

Thanks,
Bill


--
________________________________________
Bill Campbell
Module Product Engineering
Motorola Networking and Computing Systems Group
Austin, Tx.
________________________________________

View index by [date] [author] [subject]
Previous message: [M]: Perfect Polar Alignment with LX200, Marc Castel
Next message: [M]: Re: Perfect Polar Alignment with LX200, Michael Conte
Next message in thread: Re: [M]: RS232 doesn't respond, Jim & Susan Tury
Previous message in thread: Re: [M]: RS232 doesn't respond, Don Ahlskog