Tim deBortoli wrote:

> With the recent price drop in the LX200's, I have decided to upgrade from
> the LX50 10" to the LX200 10". I have a few questions to this regard.
>
> 1. Would one foresee any problem caused by adding a Telrad, dovetail and
> ring set to mount ST80mm refractor, Losmandy 2D counterweight set and
> intermittent use of 35mm camera with OAG? What does that sound like re:
> extra weight? Will it affect pointing accuracy in alt/az or polar mode if
> properly balanced? Will it put much added strain on the motors?

I got rid of my telrad after only a few weeks with my new 12" LX200. I just
wasn't using the telrad.


>
>
> 2. I have heard about some problems with the 12 to 18v inverter. What about
> a 12v dc to 110v ac converter as the one I use for my laptop when used in a
> automobile? What are peoples experiences in running the LX200 from 12v
> source rather than 18v?

When I go to dark sky locations, I use an inverter and run everything off 110v

>
>
> 3. Is the ScopeSaver really a "must buy" accessory ?

Only if you plan on using the scope in Al-Az mode. I found that I like using
my scope in polar mode, mainly because I do a photography via piggyback and
CCD.


>
>
> 4. Do people leave there LX200's outside? I currently leave the LX50 on
> it's wheely-bars in my garage covered with a Desert Storm scope cover
> (spring/summer/fall only .. when it starts to get significantly below
> freezing it comes in the house).

My LX200 has been in the observatory since 1996. No problems except for the
electronics fix -- twice! Once under warranty.

>
>
> Tim deBortoli
> Elliot Lake, Ontario

--
Michael J. Cook

Home Page - http://webhome.idirect.com/~mikecook/
Get ECU User Object Files - http://webhome.idirect.com/~mikecook/ecu/
See What Other CCDers are doing -
http://webhome.idirect.com/~mikecook/ccdnames.html
Observatory Plans - http://webhome.idirect.com/~mikecook/obsnotes.html
Take a bite Out of Light Pollution: Support IDA - http://www.darksky.org

View index by [date] [author] [subject]
Previous message: Re: [M]: Re: LX200 Questions, Dan Dickerson
Next message: Re: [M]: EP/Diag, Michael Clary
Next message in thread: Re: [M]: LX200 Questions, Greg Hartke
Previous message in thread: Re: [M]: Re: LX200 Questions, Dan Dickerson