Karen Kerr wrote:

> Hi everybody,
> I have a dilemma. I cannot get Maxim DL CCD to work with my setups.
>
> Setup 1: Toshiba Laptop, Adaptec 1480 Scsi card, Pictor 416xte & 616
> Setup 2: IBM Desktop, Adaptec 2940UW scsi card, Pictor 416xte & 616
>
> The system connects fine but when I try to send commands to the camera I get
> an error (-4). It doesn't seem to matter if the 616 color filter wheel is
> attached or not. I contacted Diffraction Limited/Cyanogen Productions,
> creators of Maxim DL, over 2 weeks ago and all I get is ok we'll look into
> it.
>
> Both systems work fine with Pictorview 6.45 and 7.10, however, I would like
> to be able to use MaximDL CCD. So my question is, has anybody else
> experienced this problem? If so, were you able to fix it and how?
>
> Thanks for your help,
>
> Karen Kerr
> Astronomy Web Page http://www.wcnet.org/~kmkerr/

Karen,
Could you tell me please are you running Windoze 98 or NT? Secondly, do you
have ANYTHING else on the SCSI chain? And finally what is the Unit ID of your
internal CD-ROM (if you have one) and what is the interface box SCSI ID set to
on your imager? Finally what is the speed of the IBM Desktop?

I'm a little disgusted with Toshiba anythings, so I'll focus on the Desktop
first. If we get that going we can look at the Toshiba later.

Clark
--
Clark Williams <http://www.s-i-g-h.com> --|--
Software Industry & General Hardware /\ /\
"Don't make enemies in a war zone!"

View index by [date] [author] [subject]
Previous message: Re: [M]: A few LX200...problems, Email address hidden
Next message: Re: [M]: Extreme Vignetting!!, Email address hidden
Next message in thread: RE: [M]: Maxim SCSI Problem, Karen Kerr
Previous message in thread: Re: [M]: Maxim SCSI Problem, Michael J. Cook