Actually, the adaptec driver appears to be ok. When I boot the computer with the
Pictor controller attached, it comes up in SCSI mode. What does not work (does not
even install properly) is either the MaxIm or the PictorView. Both yield failure
("attempted direct access to hard drive" or some such).

Any thoughts?

-steve

"Douglas B. George" wrote:

> Stephen Schleimer wrote:
> >
> > I am a newbie recently acquired an 8" LX200 and a 416XTE (upgraded). I am
> > attempting to control the system using a PC running Windows 2000. I have MaxIm
> > DL as well as the Mead control software. It looks like none of the software is
> > compatible with Win2K. Any thoughts, recommendations (other than dropping back
> > to Win95 or Win98 which are not options on this machine)?
>
> Both PictorView 7.1 and MaxIm DL/CCD talk to the camera via Adaptec's SCSI
> drivers. I note that their web site does not list Windows 2000 support
> anywhere. It may be that you will have to wait for an updated Adaptec driver to
> appear.
>
> Doug
>
> --
> Doug George
>
> Diffraction Limited (Engineering) (613) 225-9852
> Cyanogen Productions Inc. (Sales) (613) 225-2732
> Web: http://www.cyanogen.com
> Fax: (613) 225-9688

View index by [date] [author] [subject]
Previous message: Re: [M]: LX200: Big Tracking and Aligning Problem, Christian Jasinski
Next message: [M]: Wedge Mods, David Olmstead
Previous message in thread: Re: [M]: [M] 416XTE controlled by Windows 2K, Douglas B. George