RE: [M]: 416XTE cable support
| Subject: | RE: [M]: 416XTE cable support |
| From: | Email address hidden |
| Date: | Fri Jun 02 18:19:35 2000 |
--part1_a3.6c8eccc.2669c537_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
I use a simple nylon, adhesive backed strain relief on the back of the 416
... see http://members.aol.com/pleiade0/astro/ under CCD Imaging for a pic.
Good luck,
Kevin
-----Original Message-----
From: Cliff Peterson [mailto:Cpeterson@weber.edu]
Sent: Friday, June 02, 2000 2:33 PM
To: mapug@shore.net
Subject: Re: [M]: 416XTE cable support
Thanks Bob, several on the list have suggested that to me and I will do that
tonight and until the bracket is completed but it still allows some strain
to
be applied as the scope is slewed and the cable is bent or pulled. I was
hoping to completely remove it so there wouldnt be days, weeks or hopefully
years of any accumulated stresses to cause damage.
Cliff
>>> rdenny@dc3.com 06/02/00 12:56PM >>>
I just loop the cable through the hand-bar on the back of the OTA.
--part1_a3.6c8eccc.2669c537_boundary
Content-Type: text/plain; name="message.mht"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline; filename="message.mht"
From: "Kevin Dougherty"
To:
Subject: RE: [M]: 416XTE cable support
Date: Fri, 2 Jun 2000 21:20:42 -0500
Message-ID:
MIME-Version: 1.0
Content-Type: multipart/alternative;
=09boundary=3D"----=3D_NextPart_000_0006_01BFCCD8.686F7380"
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
Importance: Normal
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600
In-Reply-To:=20
This is a multi-part message in MIME format.
------=3D_NextPart_000_0006_01BFCCD8.686F7380
Content-Type: text/plain;
=09charset=3D"iso-8859-1"
Content-Transfer-Encoding: 7bit
I use a simple nylon, adhesive backed strain relief on the back of the 416
... see http://members.aol.com/pleiade0/astro/ under CCD Imaging for a pic.
Good luck,
Kevin
-----Original Message-----
From: Cliff Peterson [mailto:Cpeterson@weber.edu]
Sent: Friday, June 02, 2000 2:33 PM
To: mapug@shore.net
Subject: Re: [M]: 416XTE cable support
Thanks Bob, several on the list have suggested that to me and I will do that
tonight and until the bracket is completed but it still allows some strain
to
be applied as the scope is slewed and the cable is bent or pulled. I was
hoping to completely remove it so there wouldnt be days, weeks or hopefully
years of any accumulated stresses to cause damage.
Cliff
>>> rdenny@dc3.com 06/02/00 12:56PM >>>
I just loop the cable through the hand-bar on the back of the OTA.
------=3D_NextPart_000_0006_01BFCCD8.686F7380
Content-Type: text/html;
=09charset=3D"iso-8859-1"
Content-Transfer-Encoding: quoted-printable
http-equiv=3D3DContent-Type>
class=3D3D170351702-03062000>I use=3D20
a simple nylon, adhesive backed strain relief on the back of the 416 ...=20=
=3D
seehref=3D3D"http://members.aol.com/pleiade0/astro/">http://members.aol.com/pl=
=3D
eiade0/astro/ under=3D20
CCD Imaging for a pic.
a simple nylon, adhesive backed strain relief on the back of the 416 ...=20=
=3D
see
=3D
eiade0/astro/ under=3D20
CCD Imaging for a pic.
class=3D3D170351702-03062000>Good=3D20
luck,
luck,
face=3D3DTahoma=3D20
size=3D3D2>-----Original Message-----
From: Cliff Peterson=3D20
[mailto:Cpeterson@weber.edu]
Sent: Friday, June 02, 2000 =3D
2:33=3D20
PM
To: mapug@shore.net
Subject: Re: [M]: 416XTE =3D
cable=3D20
supportThanks Bob, several on the list have =3D
suggested that to me and I will do that
tonight and until the bracket is completed but it still allows some =3D
strain to
be applied as the scope is slewed and the cable is bent or pulled. I=20=
=3D
was
hoping to completely remove it so there wouldnt be days, weeks or =3D
hopefully
years of any accumulated stresses to cause damage.
Cliff
>>> rdenny@dc3.com 06/02/00 12:56PM >>>
I just loop the cable through the hand-bar on the back of the =3D
OTA.
------=3D_NextPart_000_0006_01BFCCD8.686F7380--
--part1_a3.6c8eccc.2669c537_boundary--
