[M]: Re: MaxIM DL, Pictor View 6.45, 7.10
| Subject: | [M]: Re: MaxIM DL, Pictor View 6.45, 7.10 |
| From: | Norm Barr |
| Date: | Mon Jun 05 11:08:28 2000 |
GLAD TO HEAR IT.i CERTAINLY WILL. tHANX nORM
----- Original Message -----
From: Cliff Peterson
To:
Sent: Monday, June 05, 2000 10:17 AM
Subject: [M]: MaxIM DL, Pictor View 6.45, 7.10
> Because my laptop doesnt have Card Bus Im using the serial connection.
Everything is running at 115 K and indicates that on the program status
line. During image transfer both MaxIm DL and Pictor View 6.45 transfer the
image in about 15 seconds but Pictor View 7.10 takes about 5 minutes and the
Pictor control box indicates the transfer takes place at 9600. This is the
Demo version of MaxIm DL or I would use it exclusively but that is waiting a
up coming pay check .
>
> Any idea why the Pictor View 7.10 would have the slow transfer rate
compared with the other two programs. It is set to 115 K in the preferences
and the status lines indicates connected at 115 K.
>
> Life seems full of mysteries,
>
> Cliff Peterson
>
>
>
----- Original Message -----
From: Cliff Peterson
To:
Sent: Monday, June 05, 2000 10:17 AM
Subject: [M]: MaxIM DL, Pictor View 6.45, 7.10
> Because my laptop doesnt have Card Bus Im using the serial connection.
Everything is running at 115 K and indicates that on the program status
line. During image transfer both MaxIm DL and Pictor View 6.45 transfer the
image in about 15 seconds but Pictor View 7.10 takes about 5 minutes and the
Pictor control box indicates the transfer takes place at 9600. This is the
Demo version of MaxIm DL or I would use it exclusively but that is waiting a
up coming pay check .
>
> Any idea why the Pictor View 7.10 would have the slow transfer rate
compared with the other two programs. It is set to 115 K in the preferences
and the status lines indicates connected at 115 K.
>
> Life seems full of mysteries,
>
> Cliff Peterson
>
>
>
