Re: [M]: MaxIM DL, Pictor View 6.45, 7.10
| Subject: | Re: [M]: MaxIM DL, Pictor View 6.45, 7.10 |
| From: | Ralph P. Pass III |
| Date: | Mon Jun 05 14:25:56 2000 |
There is a small problem with 7.10 in this regard. It will be fixed (or so I hear) in 7.11. The simple fix is to run it at 57600.
Ralph
Cliff Peterson wrote:
> Because my laptop doesnt have Card Bus Im using the serial connection. Everything is running at 115 K and indicates that on the program status line. During image transfer both MaxIm DL and Pictor View 6.45 transfer the image in about 15 seconds but Pictor View 7.10 takes about 5 minutes and the Pictor control box indicates the transfer takes place at 9600. This is the Demo version of MaxIm DL or I would use it exclusively but that is waiting a up coming pay check .
>
> Any idea why the Pictor View 7.10 would have the slow transfer rate compared with the other two programs. It is set to 115 K in the preferences and the status lines indicates connected at 115 K.
>
> Life seems full of mysteries,
>
> Cliff Peterson
Ralph
Cliff Peterson wrote:
> Because my laptop doesnt have Card Bus Im using the serial connection. Everything is running at 115 K and indicates that on the program status line. During image transfer both MaxIm DL and Pictor View 6.45 transfer the image in about 15 seconds but Pictor View 7.10 takes about 5 minutes and the Pictor control box indicates the transfer takes place at 9600. This is the Demo version of MaxIm DL or I would use it exclusively but that is waiting a up coming pay check .
>
> Any idea why the Pictor View 7.10 would have the slow transfer rate compared with the other two programs. It is set to 115 K in the preferences and the status lines indicates connected at 115 K.
>
> Life seems full of mysteries,
>
> Cliff Peterson
