Re: [M]: MaxIM DL, Pictor View 6.45, 7.10
| Subject: | Re: [M]: MaxIM DL, Pictor View 6.45, 7.10 |
| From: | Cliff Peterson |
| Date: | Mon Jun 05 17:25:28 2000 |
Thanks Ralph, there seems to be a number of small problems in 7.10 that will be fixed in 7.11. Any idea when this might happen actually happen???
I will try 57600 so I can get the improved focus routines of the 7.X product until I can afford MaxIm DL.
Cliff
>>> rppass@mediaone.net 06/05/00 04:25PM >>>
There is a small problem with 7.10 in this regard. It will be fixed (or so I hear) in 7.11. The simple fix is to run it at 57600.
Ralph
Cliff Peterson wrote:
> Because my laptop doesnt have Card Bus Im using the serial connection. Everything is running at 115 K and indicates that on the program status line. During image transfer both MaxIm DL and Pictor View 6.45 transfer the image in about 15 seconds but Pictor View 7.10 takes about 5 minutes and the Pictor control box indicates the transfer takes place at 9600. This is the Demo version of MaxIm DL or I would use it exclusively but that is waiting a up coming pay check .
>
> Any idea why the Pictor View 7.10 would have the slow transfer rate compared with the other two programs. It is set to 115 K in the preferences and the status lines indicates connected at 115 K.
>
> Life seems full of mysteries,
>
> Cliff Peterson
I will try 57600 so I can get the improved focus routines of the 7.X product until I can afford MaxIm DL.
Cliff
>>> rppass@mediaone.net 06/05/00 04:25PM >>>
There is a small problem with 7.10 in this regard. It will be fixed (or so I hear) in 7.11. The simple fix is to run it at 57600.
Ralph
Cliff Peterson wrote:
> Because my laptop doesnt have Card Bus Im using the serial connection. Everything is running at 115 K and indicates that on the program status line. During image transfer both MaxIm DL and Pictor View 6.45 transfer the image in about 15 seconds but Pictor View 7.10 takes about 5 minutes and the Pictor control box indicates the transfer takes place at 9600. This is the Demo version of MaxIm DL or I would use it exclusively but that is waiting a up coming pay check .
>
> Any idea why the Pictor View 7.10 would have the slow transfer rate compared with the other two programs. It is set to 115 K in the preferences and the status lines indicates connected at 115 K.
>
> Life seems full of mysteries,
>
> Cliff Peterson
