If you have the older model LX200, what you are getting is normal. The
older model did not have 2 star alignment...only one star alignment.

To check what version software you have, power up your scope and keep your
eye on the keypad display. As soon as it boots up, the version software
will be briefly (only briefly) displayed.

Al
----- Original Message -----
Sent: Sunday, July 23, 2000 3:36 PM
Subject: [M]: Re: Problem with Enter Key


> Hello Ivor: I am in a worse state than you . I find that when I set up on
> one star, that the second star is NOT OFFERED to me. I have tried for help
> but so far I have receivedv none. Can you help me. I have an LX200 10"
> Meade, but it is an older model ./The hand device says2.50, but the spare
> chips say that I have the next up setup! I am in a real quandry, and can
> use as much help as you see fit to,provide. I'm 55 and a retired science
> Professor who was involved in Insect biology, but my interests have
> enlarged, beyond biological to the physical sciences. I would appreciate
any
>
>
>
>
> ----- Original Message -----
> Sent: Saturday, July 22, 2000 2:04 PM
> Subject: [M]: Problem with Enter Key
>
>
> > The last couple of nights, I noticed that when I am trying to do a 2
star
> alignment, after I have centered the second star, it takes a number of
> attempts at pressing the enter key before it beeps.
> > The enter key seems to work ok all other times, has anyone else
> encountered this?
> >
> > f/10 LX 200.
> >
> > Thanks
> > --Ivor
> >
> >
>
>

View index by [date] [author] [subject]
Previous message: Re: [M]:OT - FIELD command, norm barr
Next message: Re: [M]: Getting going, Paul Goelz
Next message in thread: Re: [M]: Re: Problem with Enter Key, Ivor Barker
Previous message in thread: [M]: Re: Problem with Enter Key, norm barr