The connector into the Pictor is the 'large', centronics type. You have two choices for Pictorview: 6.45, a 16 bit version which may work with your Bustoaster, and 7.11, a 32 bit version which definitely will not.

Your desktop will work with either 6.45 or 7.11.

If you want to use 7.11 on the notebook, make sure it has a type II PCMCIA socket (also known as a PCCard socket) and you need to get an Adaptec 1480.

Ralph


kevin sterling wrote:

> I'm considering moving up from a 218XT to a 416. What type of SCSI cable is
> required to connect to the 416? Any recommendations as to the adapter? I
> will be using it both with a desktop (Adaptec 2490U2W) and a notebook. I
> have an old (4 - 5 years old) bustoaster PCMCIA card to use with the
> notebook.
>
> Thanks
> Kevin

View index by [date] [author] [subject]
Previous message: [M]: RE: New images, Nikolidakis George
Next message: [M]: Hole pattern for field tripod and superwedge for 10" LX200, Tim Hager
Previous message in thread: [M]: 416 Pictor, kevin sterling