My 216xt fits into 1.25" eyepiece holders as well. However, the 1.25"
barrel screws into a ring which itself screws into the camera head. The
camera head threads are the Universal threads and therefore, I can screw
the camera onto any of my camera adapters. Is the 201xt built in a
similar fashion? If so, wouldn't the ETX to camera adapter work?

Glenn

----------
Sent: Wednesday, April 01, 1998 3:12 PM
Subject: Re: [M]: ETX Camera Port

My preference is to get a screw adapter (again for about $30.00)
that screws
onto the ETX and onto the 201XT. This way I do not need to
worry about
slipping and sliding.

Ralph

Bert Katzung wrote:

> Britt, Dale (AZ15) wrote:
> >
> > I need a way to attach my 201XT guider to the camera port on
the Meade
> > ETX. The 201 slips in like a 1.25" eyepiece. Does anyone
know of someone
> > who sells an attachment that will provide the necessary
connection.
> Hi, Dale:
> I got mine from Pocono. They called it an "Apogee ETX to 1.25
adapter"
> $29.95. Works fine.
> Bert Katzung

View index by [date] [author] [subject]
Previous message: [M]: RE: Artificial Star Test, Christos Spyrou
Next message: Re: [M]: Dospview, Camera shutdown and Temperature., John Hoot
Next message in thread: RE: [M]: ETX Camera Port, Richmann, Michael
Previous message in thread: Re: [M]: ETX Camera Port, Ralph P. Pass III