M. Gartland wrote:
>
> 1. Does anyone know how to do a controlled 216XT shutdown when connected
> and using Dospview? I don't see a shutdown selection in the menus.
>
>From memory it's automatic when shutdown is selected. Look at the camera
display, it should cycle down.

> Pictor has a controlled shutdown and there is a manual procedure using
> the camera button, but I don't think the button works after the Camera
> is in PC mode.
>

If you need a manual shutdown after a crash or whatever, disconnect the
power to the camera for a second, re-connect, then do a manual shutdown
using the camera button as per instructions for stand-alone use.

Regards,
Coffs Harbour N.S.W. Australia

View index by [date] [author] [subject]
Previous message: Re: [M]: Help playing around with the 416(long), Ralph P. Pass III
Next message: [M]: build a 12 to 18 vdc, Ric L Ecker
Next message in thread: RE: [M]: Dospview, Camera shutdown and Temperature., Michael Hart
Previous message in thread: Re: [M]: Dospview, Camera shutdown and Temperature., John Hoot