| |
[index]
[month]
[prev]
[next]
[thead-prev]
[thread-next]
Subject: Re: [M]: RE: Re: Help playing around with the 416(long)
From: Clark Williams
Reply To: mapug@shore.net
Date: Thu Apr 02 05:09:53 1998
|
While you're here, how about checking out the
Astronomy Book
List ? |
I really appreciate everyones help on this. I'm trying to narrow down
exactly where and when the SCSI begins to get lost. If I can find out who
can and who can't duplicate this scenario, it will help me pin point the
phase error (or at least what I suspect is a phase error). Once I do that I
may be able to suggest just what needs to be repaired so that the SCSI
always works correctly.
Thanks folks for the help.
Clark Williams
Chris Heapy wrote:
> I cannot duplicate this problem, the camera takes images at step 13 with
> no problems. I take it you did see this error more than once? - with
> re-boots of everything in between?
>
> Chris Heapy
>
> Heapy Chris CG wrote:
> >
> > I can try it out later tonight.
> > I've dumped 6.4b3 in favour of the earlier b2 though, because the
> > autocentre does not work on my setup with b3.
> > Chris Heapy
> >
> > >----------
> > >Sent: 01 April 1998 10:35
> > >Subject: [M]: Re: Help playing around with the 416(long)
> > >
> > >Clark,
> > >
> > >My 416 isn't available - perhaps one of the other 416 guys will be
> > >able to run through this. If this is still unresolved when I get my
> > >camera back, I'll run through it.
> > >
> > >Bob
> > >http://www.usit.com/rfreeze
> > >-----Original Message-----
> > >Date: Tuesday, March 31, 1998 7:20 PM
> > >Subject: [M]: Help playing around with the 416(long)
> > >
> > >
> > ><<massive snippage>>
> > >
> > >>
> > >>Can anyone out there duplicate this scenario for me and let me know
> > >if
> > >>they get the same errors, and or at what steps they get something
> > >>different?
> > >>
> > >>TIA
> > >>Clark Williams
> > >>
> > >>
> > >
> > >
>
> --
> *Model Engineer Support Page*
> Engineering: http://easyweb.easynet.co.uk/~chrish/homepage.htm
> Astro Stuff: http://easyweb.easynet.co.uk/~chrish/lx200.htm
View index by [date] [author] [subject]
Previous message: Re: [M]: RE: Re: Help playing around with the 416(long), Clark Williams
Next message: Re: [M]: RE: MAPUG admin: good news / bad news, JohnLX200
Next message in thread: Re: [M]: RE: Re: Help playing around with the 416(long), Clark Williams
Previous message in thread: Re: [M]: RE: Re: Help playing around with the 416(long), Clark Williams
|
|