Ralph,
What's the name of that adapter and where'd you get
it? With any luck (unless UPS drops the ball), my ETX
and mounting rings arrive tonight...

Mike

> -----Original Message-----
> Sent: Wednesday, April 01, 1998 5:12 PM
> Subject: Re: [M]: ETX Camera Port
>
> My preference is to get a screw adapter (again for about $30.00) that
> screws
> onto the ETX and onto the 201XT. This way I do not need to worry
> about
> slipping and sliding.
>
> Ralph
>
> Bert Katzung wrote:
>
> > Britt, Dale (AZ15) wrote:
> > >
> > > I need a way to attach my 201XT guider to the camera port on the
> Meade
> > > ETX. The 201 slips in like a 1.25" eyepiece. Does anyone know of
> someone
> > > who sells an attachment that will provide the necessary
> connection.
> > Hi, Dale:
> > I got mine from Pocono. They called it an "Apogee ETX to 1.25
> adapter"
> > $29.95. Works fine.
> > Bert Katzung
>
>

View index by [date] [author] [subject]
Previous message: [M]: RE: MAPUG admin: good news / bad news, Richmann, Michael
Next message: [M]: LX-200 #1220 Field De-Rotator, Steven Williams
Previous message in thread: RE: [M]: ETX Camera Port, Graham, Glenn