Bob Freeze wrote:

> -----Original Message-----
> Date: Thursday, April 02, 1998 5:53 PM
> Subject: Re: [M]: RE: Re: Help playing around with the 416(long)
>
> <<snipped>>
>
>
> Clark, I've spent quite a bit of time with my 416 sitting in my home
> office floor and have NEVER had the internal temp rise above 0 (zero)
> degrees. When the room is warm (rare, and never above 80F), it can't
> cool much below -5C.
>
> It sounds to me like you have a problem with the cooling system in
> your camera, or you have another problem causing something else to run
> so hot that the cooling system can't keep up.
>
> <<snipped>>
>

You could be correct. I asked Amy at Meade about tech support experience
with this probelm, and she said that she had, had a few people who
demonstrated problems with the camera when indoors. I still don't know
what that means. Quantifying and qualifying data and errors is not easy
to do when you are one the phone with people.

Still I'll post my experiments and the results. I'm going to see if I can
borrow the SCSI bus monitor this weekend and have some more fun looking at
the SCSI commands.

Clark

View index by [date] [author] [subject]
Previous message: Re: [M]: CCD: KAF-0400(L) chips, Clark Williams
Next message: Re: [M]: RE: MAPUG admin: good news / bad news, Richard Daley
Next message in thread: RE: [M]: Help playing around with the 416(long), Michael Hart
Previous message in thread: Re: [M]: RE: Re: Help playing around with the 416(long), Bob Freeze