| |
[index]
[month]
[prev]
[next]
[thead-prev]
[thread-next]
Subject: Re: [M]: Hot pluging Safety switch
From: Bill Arnett
Reply To: mapug@shore.net
Date: Sun Apr 12 00:05:18 1998
|
While you're here, how about checking out the
Astronomy Book
List ? |
At 8:23 PM -0700 4/11/98, R. A. Greiner wrote:
>... I
>suggest the following procedure for turning on and off the LX200. When
>turning
>off the LX200, pull the plug on the power without turning off the off switch.
>After a few seconds the scope will be really dead electrically. Then turn off
>the off switch...
This may be a case of "a little knowledge is a bad thing" but.... the above
procedure will have the LX200 operating at much lower than expected
voltages for a second or two. Is that any cause for worry?
---
Bill Arnett "Science is a way of trying
San Jose, CA USA not to fool yourself." -- Feynman
View index by [date] [author] [subject]
Previous message: Re: [M]: LX200: Which laptop or palmtop?, Bill Arnett
Next message: [M]: OT: LX200 web page, Thomas Wideman
Next message in thread: Re: [M]: Hot pluging Safety switch, R. A. Greiner
Previous message in thread: Re: [M]: Hot pluging Safety switch, R. A. Greiner
|
|