I always lock the DEC when setting up my scope and haven't had any problems.

I suggest that you consider buying a ScopeSaver table for your 10". This
makes setting up the scope to the tripod much easier. If you don't know
much about the ScopeSaver, go to http://www.cloudynights.com When you get
there, select "Accessories", then scroll down to ScopeSaver.

Al
----- Original Message -----
Sent: Wednesday, May 23, 2001 2:11 AM
Subject: [M]: Assembling the LX200


> Hi,
> This is a really dumb question but one I really need to know. I have been
> grappling with the weight of my 10" LX200 and trying to figure out a
> graceful way of mounting it on the Tripod stand. If I dont engage the RA
> and Dec Locks, the telescope OTA and the RA drive base swivel wildly as I
> try to mount it, hence I keep these locks engaged while mounting it on the
> tripod. I'm however scared that this will damage my RA and Dec drive.
> Any suggestions on if I'm supposed to keep the locks engaged or not, and
> better ways to assemble the LX200 and Tripod setup would be appreciated.
> Thanks,
> Adi
>
>
>
>

View index by [date] [author] [subject]
Previous message: [M]: RE: Mod Pics, LaGuardia, Kristofer S.
Next message: [M]: RE: Re: Assembling the LX200, mapug
Next message in thread: [M]: RE: Re: Assembling the LX200, mapug
Previous message in thread: [M]: Assembling the LX200, Aditya Damodaran