Carl,

Meade offers two types of repairs. The repair which is right for you
depends on your problem or problems.

(1) $200 repair. You remove the following components from your LX200
(mother board, daughter board, RA drive, DEC drive, keypad and all cords)
and mail them to Meade. Meade will provide detailed instruction on which
parts to remove, how to remove them and how to pack/mail to factory.

You will usually get everything back, completely checked, tested and
repaired within 4 weeks. This option will cost $200 + mailing to
Meade...everything will be mailed back to you at Meade's expense.

(2) $500 repair. This option is used when your problems are more than just
electronic in nature. In this case, you send the OTA/Fork back to Meade for
complete overhaul. Here is what Meade will do: Check and repair/replace
electronics. Check and clean optics. (If optics require replacement, you
will be notified and billed extra) Check and repair/replace any mechanical
problems. Turn around time is about 4 weeks.

You are responsible for shipping the scope to Meade...shipping back to you
is covered. This is the _only_ repair which is covered with a
warranty...the $200 option is not.

Hope this helps.

Al
----- Original Message -----
Sent: Tuesday, July 03, 2001 8:45 AM
Subject: [M]: LX200 repair cost--what is it now?


> Hello, group:
>
> I apologize if this is a rehashing, but I've been gone for a while without
> my email.
>
> My question is this: What is the current cost to have an LX200
> repaired--specifically, the motherboard and motors? I called about a year
> ago to send it in and it was $200, but I think I've heard that it went
> up. What is the consensus on this?
>
> Also, what is their repair telephone number? I can't seem to locate it
> anymore.
>
> Thanks in advance!
>
> ____________________________________
> Carl Anderson
>
> +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
> "Relax, its only ONES and ZEROS!"
> +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
>
>
>
> _________________________________________________________
>
> Do You Yahoo!?
>
>
>
>
>
>

View index by [date] [author] [subject]
Previous message: Re: [M]: Repairing the LX200 Dec and RA drives, Ivor Barker
Next message: Re: [M]: H alpha Filters, Cliff PETERSON
Next message in thread: Re: [M]: Re: LX200 repair cost--what is it now?, Carl Anderson
Previous message in thread: [M]: LX200 repair cost--what is it now?, Carl Anderson