What a great job of explaining and documenting. Bruce did a lot of work on
this, and it couldn't have been done better.

What a gem for LX200 owners. I downloaded the whole thing for fear that it
would disappear off of the web.

Pete Peterson

-----Original Message-----
Sent: Tuesday, July 03, 2001 2:24 AM
Subject: [M]: Repairing the LX200 Dec and RA drives

Hi all,

I just finished a first draft of a page that will hopefully help a lot of
people out when it comes to the repair of the infamous 'motor runaway' and
'dead motor' problems on the LX200. It's a bit wordy, but perhaps it can be
of some help to people that don't want to have to send their units in for
the
$200 repair. I hope so. I also hope that it puts a bit of a new twist on
solving the problems.

It can be directly accessed at: <http://members.aol.com/ccdastro/decfix.htm>

Tomorrow I'll put a permanent link to it from my personal page.

Comments and suggestions are welcome.

For what it's worth.

Bruce Johnston

Bruce Johnston Computing
<http://members.aol.com/bjohns7764>
Internet home for "SuperFix" and "MegaFix" image processing software.
Personal page: <http://members.aol.com/ccdastro>

View index by [date] [author] [subject]
Previous message: Re: [M]: Re: LX200 repair cost--what is it now?, Carl Anderson
Next message: [M]: Re: RE: Re: LX200 repair cost--what is it now?, George Benedik
Next message in thread: Re: [M]: Repairing the LX200 Dec and RA drives, Bob
Previous message in thread: Re: [M]: Repairing the LX200 Dec and RA drives, David Olmstead