| |
[index]
[month]
[prev]
[next]
[thead-prev]
[thread-next]
Subject: RE: [M]: Meade Zero Image-Shift Microfocuser Focus Problem
From: Nigel Bannister
Reply To: mapug@shore.net
Date: Thu Sep 18 02:58:14 2003
|
While you're here, how about checking out the
Astronomy Book
List ? |
Hi Lance,
I use a Meade #1200 zero-shift focus unit on an LX200 classic - it uses
the same focus socket on the panel and the same controls on the keypad.
My focuser will *not* work in the mode which the telescope is in
immediately after you have "gone-to" an object - pressing "5" plus the
up/down arrows in any slew speed has no effect. *However*, if you press
the "mode" key (after the slew is complete), so you get the
telescope/site menu or the time readout etc, then the focuser works
fine. It's as if the focus facility is deliberately locked out in that
first mode. Give it a try.
Cheers
Nigel
View index by [date] [author] [subject]
Previous message: [M]: OT:LightWedge Chart viewer from Sporty's, Bill VanOrden
Next message: Re:[M]: Meade Flip Mirror alignment, Email address hidden
Next message in thread: RE: [M]: Meade Zero Image-Shift Microfocuser Focus Problem, Lance Hurt
Previous message in thread: Re: [M]: Meade Zero Image-Shift Microfocuser Focus Problem, Lance Hurt
|
|