----- Original Message -----
Sent: Friday, November 05, 2004 10:32 PM
Subject: Re: [M]: Re: LX-200 Power Panel Defect


> Thank you for your response. I have disconnected the diode D-1 and it
passes
> an ohmmeter test. This points to the voltage regulator. I will check that
> next. I'll probably replace both. I am happy to learn that the LM339 is
available
> and cheap. If all else fails, I will replace them. This MAPUG resource is
> great. There is so much help available, based on knowlege and experience.
I am
> impressed. Bob Manley
If you have any trouble sourcing them in the US (DigiKey should have them),
in the UK, the LM339, is £0.44 each in 'one off' quantities, and the
voltage regulator is the same price. I'll gladly stick some in the post if
you have any trouble finding them.

Best Wishes

View index by [date] [author] [subject]
Previous message: Re: [M]: Re: Lack of Messages, Dave Schanz
Next message: [M]: Lack of messages, Keith
Next message in thread: [M]: Re: Re: LX-200 Power Panel Defect, Brian Bond
Previous message in thread: RE: [M]: Re: LX-200 Power Panel Defect, John Mahony