> I don't know the slew speed code either, but as a programmer who has
> made my LX200 respond to almost every command I know of, including
> automatic synching, may I suggest the possibility of some brave soul
> trying each of the 676 or so possible letter combinations, along with
> appropriate numbers, to see what happens? (I suppose the danger is
> that some undocumented commands known only to Meade could put the
> telescope or keypad at risk.)
>

I have tried sending all combinations of "Gx" where
x is ascii 0 .. ascii 255. Trying to discern some
logic from the command set, I noticed all "get info"
commands began with "G". There was nothing that
seemed to yield the current slew speed. One
command "Go" returned "90*" - I didn't see this listed,
but perhaps I missed something. This value did not
change when I changed the position of the scope.

Matt
"A mind stretched to a new idea never returns to its original dimension." - O. W. Holmes

View index by [date] [author] [subject]
Previous message: Re: [M]: Reticules, Email address hidden
Next message: Re: [M]: Slew Speed Code, J Nordby
Next message in thread: Re: [M]: Slew Speed Code, J Nordby
Previous message in thread: Re: [M]: Slew Speed Code, R. A. Greiner