Monthly Thread Index: November, 2003
[$20 3-D balancing system for 14" LX200]
[(no subject)]
[14" question]
[14** question]
[18 volt AC power supply]
[35mm Panoptic, or the 31mm Nagler?]
[7" LX200GPS Mak Specs]
[: Lunar observing with Meade SCT's.]
[adapters?]
[Adding a guide scope]
[adding a guide telescope]
[auth 568cb66e subscribe mapug takawa@pacific.net.au]
[Autostar 495 Question]
[Change to Mapug.com Homepage]
[changing positions]
[Christmas is coming...]
[Classic LX200 Serial through IR?]
[Cleaning the corrector plate]
[Cleaning the inside of the LX200]
[Cleaning the Inside of the LX200]
[Collimation page ready !!]
[Corrector Plate]
[corrector plate removal]
[CURIOSER AND CURIOSER]
[damaged main pc board]
[Date: Thu, 27 Nov 2003 07:41:21 -0500]
[Dec clamp needs help/flat field light box design/polar alignment]
[deep sky / altaz]
[Deepsky alt/az II]
[Deepsky and altaz ?]
[Degree worry]
[Derotator with 12" LX200?]
[Does the Meade webcam work well with older (non GPS)]
[Does the Meade webcam work well with older (non GPS) LX200s?]
[ebay scam?]
[ebay scam? (was: LX200 tracking problem)]
[econo-scope comments was: curiouser]
[Electrical question]
[F6.3]
[finder]
[FS: Corrector Plate for 8" SCT]
[Good Deal on Celestron Eyepiece/Filter Package]
[GPS-Mate]
[Guiding]
[Help ! LX200 12" GPS looking dead (II) !]
[Help ! LX200 12" GPS looking dead (III) !]
[Help ! needed with LX200 12" GPS looking dead !]
[Inside the base of the LX-200]
[Laptop Connection]
[Losmandy Titan versus Mountain 250 Eq Mount]
[lost Pictor 201XT user guide]
[Lunar observing with Meade SCT's]
[Lunar observing with Meade SCT's.]
[Lunar observing with Meade SCT's:]
[LX-200 18 volt AC adapter]
[LX-200 equatorial setup]
[LX200 10" on Batter Power]
[LX200 10" on Battery Power]
[LX200 16 inch RS-232 ports]
[LX200 ALT slew stops]
[LX200 Mak and Large CCD Chips]
[LX200 tracking problem]
[LX200 tracking problem-retrograde?]
[LX200GPS - External PSU with batteries in?]
[LX200GPS/SBIG ST7XE/TruTech Filter Wheel]
[LX50: Encoders]
[Mark and William's dialog]
[Meade Autostar Suite and LPI Yahoo group]
[Meade LPI]
[Meade Picor 416 saga]
[Meade SCT Telescopes]
[Meade Superwedge - Completed!!]
[Mount for 10/12"]
[New 12" questions]
[New MaxIm DL driver for Meade SCSI]
[No Thread]
[Off-topic-Anyone available for speaking at a monthly meeting?]
[Olympus OM-1]
[OT: APOD AWOL?]
[OT: correct Subject to my previous letter]
[OT: Formatting Question for Astronomical Database]
[OT: New Design for 2-D Counterweight System Available]
[OT: New Spreadsheet of Astronomical Data]
[OT: Nites Cape covers]
[OT: setting circles for radio telescope]
[OTA weights]
[Pictor 216XT Question]
[Pictor 216XT<>LX200 power issues.]
[Pictor 416xte.]
[Pier top plates & how do I install a G-11 head to a concrete pier?]
[RA Drive Grease]
[RA drive grease]
[Re:]
[Re:14" question]
[Re:[M]: OTA weights]
[RE:[M]: Re: Re: Superwedge - HDPE vs Teflon for bearing]
[Re:[OT]Superwedge]
[Removing Corrector-- Cleaning the corrector plate]
[SCT vs Newt; 2" diagonal]
[slew rates]
[Sorry for the OT- Bert Katzung please read]
[Southern Polar Alignment]
[spam countermeasures - please ignore]
[Springy Thingy]
[Standard wedge help]
[STI 'Stiletto' Focusers - Free Shipping]
[Stopped LX200 clocks...strange problem]
[Superwedge - HDPE vs Teflon for bearing]
[tangling automated slewing]
[Thanks]
[Track of Hermes near closest approach]
[UNSUBSCRIBE]
[unsubscribe]
[Wedge question]
[weights]
[Where to send film]
[Windows 2k and the 416XTE]
[your images]
[[digital_astro] Moon Eclipse, please join 3D effort !!]
[[M]Tripod Retaing Pins was ~Re: Re: New 12" questions]
[[Re: [M]: Meade LPI]]
[[Re: [M]: Re: Re: Pictor 216XT Question]]
[[[M]: Re: Re: Electrical question]]