Sponsored By:
[index] [month] [prev] [next] [thead-prev] [thread-next]

Subject: Re: 12VDC to 18VDC converter for LX-200
From: Steven Williams
Reply To: mapug@shore.net
Date: Sat Apr 01 05:06:09 1995

On Fri, 31 Mar 1995, Brandon Jones wrote:

> I am not being sarcastic but if you have 6 volt batteries anyway
> why not use three of them and forget the power failure in the middle.

Good idea. I did it today. Shame I had to waste $200 on it, but there you go. I wouldn't trust the thing again anyway, even if I did fix it.

I've had to by a new charger too, one that can handle 6VDC batterys. With all this, there goes my savings for me 9mm Naglar :-((

Thanks for your advice, it was taken.

*************************************** * Steven Williams * * Email: stevew@gco.apana.org.au * * Home Page: http://gco.apana.org.au * * ftp: wwa.com:/pub/ccd * ***************************************

View index by [date] [author] [subject]
Previous message: Re: Deep cycle battery, Richard Bright
Next message: Piggy Back system for 8" on 16" LX200, Gary Heath
Next message in thread: Re: 12VDC to 18VDC converter for LX-200, Brandon Jones
Previous message in thread: Re: 12VDC to 18VDC converter for LX-200, Brandon Jones