Sponsored By:

Subject: Re: focusing backlash help
From: Doug Robertson
Reply To: mapug@shore.net
Date: Wed May 10 07:23:04 1995

On Tue, 9 May 1995, Wes Phillips wrote:

> I am having very severe backlash problems with my focuser. I down
> loaded the article dealing with correcting this problem. Have any of
> you performed this technique, running focus all the way
> counter-clockwise, unscrewing focusing assembly, pulling and pushing
> mirror back and forth to distribute lubricant, readjusting set screws?
> If you have were you successful in correcting the backlash problem? Are
> there any pitfalls to watch out for?

I have performed the procedure for reducing the image shift. If you closely follow the directions given there should be no problems and it will reduce the image shift considerably. I highly recommend you try it. If you have any questions about the process I'm sure Scott can answer them.

---- Doug Robertson Tandy Information Services drober1@tandy.com Tandy Technology Square, Suite 400 Voice: (817) 870-0491 200 Taylor Street, Fort Worth, TX 76102