Sponsored By:

Subject: Re: Re: Telrad
From: Cliff Peterson
Reply To: mapug@shore.net
Date: Tue Jul 18 00:39:28 1995

> I would like to understand if the 10" LX200 can still be
> packed into its standard foam lined case with the device attached. As it
> would seem that the telrad 'base' attaches with 'sticky' tape I assume that
> it cannot be removed each time the scope must go in its case.
>
The LX200 can still go back into the case nicely with the base attached. You have to remove the main body of the Telrad of course but the base isn't a problem. I've been doing it frequently and the foam packing shown no damage or wear by doing this.

Cliff

* * * * * * * * * * * * * * * * * * * * * * * * Cliff Peterson Computer Specialist * * Weber State University * * Applied Science & Technology * * Ogden, UT 84408-1801 * * Tel: (801) 626-7590 FAX: (801) 626-6987 * * Internet cpeterson@cc.weber.edu * * * * * * * * * * * * * * * * * * * * * * * *