Sponsored By:
[index] [month] [prev] [next] [thead-prev] [thread-next]

Subject: Re: [M]: Primary Holder?
From: Rob Roy
Reply To: mapug@shore.net
Date: Tue May 27 04:19:46 1997

>The Mirror floats on a film of grease on the baffle tube, it has no
>mirror holder, only a hole in the mirror.
>

>>I assume there is some sort of casting that holds the mirror, right?
>>How
>>is the mirror attached?
>>

Haven't had mine out for a while, so if my memory serves me correctly........

The mirror is "sandwiched" through the hole in it, between the baffle
tube/sliding cylinder at its front and the back support for the mirror by
means of a threaded assembly. Not unlike a huge nut and bolt with a hole
down the middle passing through the mirror. The secondary and its baffle
are held in place on the corrector plate in the same fashion.


Rob Roy
Maker of LX200/Magellan II joysticks
INFO- http://worldchat.com/commercial/skyoptics/


View index by [date] [author] [subject]
Previous message: Re: [M]: Anti-Blooming setting, Valery P. Deryuzhin
Next message: [M]: Track+accumulate, Antonio Socias Carrillo
Next message in thread: Re: [M]: Primary Holder?, Rob Roy
Previous message in thread: Re: [M]: Primary Holder?, Ric L Ecker