Sponsored By:
[index] [month] [prev] [next] [thead-prev] [thread-next]

Subject: [M]: Re: LX200 setup problems
From: rfreeze
Reply To: mapug@shore.net
Date: Thu Nov 13 00:14:54 1997

I ended up using 3 large washers under the spreader to get it all snug.
Also, I forgot about the 'C' clip ... it made transporting the tripod
*noisy* and was more of an inconvenience than packing it up separately.

----------
> From: robert rossland <robert.rossland@eu.e-universe.com>
> To: mapug@shore.net
> Subject: [M]: LX200 setup problems
> Date: Tuesday, November 11, 1997 5:50 PM
>
> I just received my new Meade 7" Maksutov-Cassegrain LX200 via UPS. I
> have come into a problem while trying to put the tripod together,
after
> putting the threaded rod into the spreader bar and then into the
tripod
> head, I'm told to place the "c" clip into the slot in the threaded
rod.
> Well i did this and now the spreader bar will not come down far
enough
> to fit in place with the three tripod legs! Does anyone have a
solution
> to my problem, other than just removing the C-clip. Also any advice
on
> setting up and using this scope would be greatly appreciated.
>
> Thanks,
> Robert
>

View index by [date] [author] [subject]
Previous message: RE: [M]: Meade Variable Tele-Extender, Marc
Next message: [M]: Meade variable tele-extender, Mike Schriber - Corporate Computer Centers, Inc.
Next message in thread: Re: [M]: Re: LX200 setup problems, Rob Roy
Previous message in thread: RE: [M]: LX200 setup problems, Richmann, Michael