Sponsored By:

Subject: RE: [M]: image shift/HELP
From: Heapy Chris CG
Reply To: mapug@shore.net
Date: Thu Apr 23 00:56:03 1998

I can't imagine why it should be. Don't slap the grease all over the
place - a thin even layer is what is needed. Look in the MAPUG archives
for instructions on how to reomve the corrector plate safely, it's a
very easy job once you know how - I've done it in the field, in the dark
with the aid of a small red torch held between my teeth (and not lost a
single screw!).

Chris

>----------
>From: Don Holcombe[SMTP:donholco@flash.net]
>Sent: 23 April 1998 05:05
>To: mapug@shore.net
>Subject: Re: [M]: image shift/HELP
>
>
>-----Original Message-----
>From: Chris Heapy <Chrish@easynet.co.uk>
>To: mapug@shore.net <mapug@shore.net>
>Date: Wednesday, April 22, 1998 6:51 PM
>Subject: Re: [M]: image shift/HELP
>
>
> Chris
>Thanks for the reply. Yes I thought 1/4 image shift in the FOV target was
>excessive. Your suggestion of the silicone grease may be the way I go.
>Will my warranty be voided if I dissasemble the unit to replace the grease?
>Don Holcombe
>
>
>