Sponsored By:

Subject: Re: [M]: [M] Com Ports-veering off (A board recommendation)
From: wayne t. watson
Reply To: mapug@shore.net
Date: Fri Mar 07 23:25:52 1997

>
> wayne t. watson wrote:
> > <SNIP>
> > I'd put in a plug for DigiBoard, now, Digi International.
> > I have one of their 2 port PCX/e cards and it allows
> > one to create a com3/4 off of another interrupt that
> > is totally independent of what is being done on com1/2.
> > I bought mine 3 years ago and their boards are fairly
> > expensive. They have a newer one that is in the
> > $100-125 range, if you are interested.
> >
> Wayne,
> Do you have the ordering info, ie, source address, part number, etc.?
> Thanks,
> Tom
>
The card is an Acceleport C2 and it contains two ports and sells
for $149. They have other versions at a lower cost, and some
very powerful ones at a *very* high cost (like >$1000). Give them
a call to find out the particulars or visit their web site. They
have local distributors so ask or look (web) for them too.

Their web site is: www.digibd.com, and some relevant phones, etc. are:
Digi International
11001 Bren Road E.
Minnetonka, MN 55343

Phone:
Sales: 800-344-4273 and 612-912-3444
Fax: 612-912-4991

Email Addresses sales@dgii.com